PBH COYOTE SWAP BUILDERS GUIDES
Coyote Swap 1987-1995 Mustang GT
Coyote Swap 1996-2004 Mustang GT
Product Instructions
Product Instructions
Naturally Aspirated Speed Drive for 5.0L Coyote Engine
Speed Drive installation instructions for Naturally Aspirated applications purchased before 2/20/20
Speed Drive installation instructions for Naturally Aspirated applications purchased after 2/20/20
Roush/VMP/Ford Performance 2.3L and 2.6L Rear Feed TVS Supercharger Speed Drives
PBH-1211 – Speed Drive Roush/VMP SC kit for 5.0L Coyote with standard profile PS and Modular Ford AC compressor
PBH-1212- Speed Drive Roush/VMP SC Kit for 5.0L Coyote with standard profile ps and Sanden AC Compressor
PBH-1221- Speed Drive Roush/VMP SC Kit for 5.0L Coyote with Low Profile PS and Mod Ford AC compressor
PBH-1222 – Speed Drive Roush/VMP SC kit for 5.0L Coyote with Low Profile PS and Sanden SD7 compressor
Whipple 2.9L Gen 3 Front Feed Supercharger Speed Drives
PBH-1311 – Speed Drive for Whipple 2.9L Front Feed SC kit for 5.0L Coyote with standard profile PS and Modular Ford AC Compressor
PBH-1322 – Speed Drive Whipple 2.9L front feed SC kit for 5.0L Coyote with Low Profile PS and Sanden SD7 compressor
Edelbrock 2650 Supercharger Speed Drives
Speed Drive Installation Instructions for Edelbrock 2650 Supercharger
Whipple 3.0L Gen 5 Front Feed Supercharger Speed Drives
Speed Drive installation instructions for Whipple Gen 5 Front Feed 5.0L Coyote Supercharger(all variations)
Roush 2650 Front Feed Supercharger
Speed Drive Installation Instructions for the Roush 2650 Supercharger
Individual Component instruction’s
PBH-100 – Alternator bracket instructions for Naturally Aspirated
PBH-101 – Speed Drive alternator bracket instructions for Roush/VMP 2.3L and 2.6L rear feed supercharger
PBH-102 – Speed Drive alternator bracket instructions for GEN3 Whipple 2.9L front feed supercharger
PBH-103 – Speed Drive Alternator instructions for upfit to Roush/VMP rear feed supercharger
PBH-105 – Speed Drive Alternator instructions for Whipple Gen 5 supercharger
PBH-106 – Speed Drive Alternator instructions for VMP Odin Supercharger
PBH-107 – Speed Drive Alternator instructions for Roush 2650 Front Feed Supercharger
PBH-200 – Speed Drive Air Conditioning Compressor instructions for Modular Ford compressor
PBH-201 – Speed Drive Air Conditioning Compressor instructions for Sanden SD7 7176 compressor
PBH-300 – Speed Drive Standard Profile Modular Ford Power Steering Pump bracket instructions
PBH-301 – Speed Drive Low Profile Modular Ford Power Steering Pump bracket instructions
PBH-304 – Speed Drive Revolver GM Type II Power Steering Pump bracket instructions
PBH Speed Series Pulleys
Speed Series pulley instructions for all variations
Control Pack Instructions
PCP-1116B V1 – PBH GEN 1 Original body harness instructions (Purchased prior to 11/1/21)
PCP-1116B V2 – PBH GEN 1 body harness instructions (Purchased after 11/1/21)
PCP-1108 – PBH GEN 2 body harness instructions
PCP-1186 – PBH GEN 3 body harness instructions
PBH-5000 / PBH-5001 / PBH-5002 – PBH Gen 1 6R80 and Manual Control Pack
PBH-5003 / PBH-5003-F150 / PBH-5004 / PBH-5004-F150 – PBH GEN 2 6R80 and Manual Control Pack
PCP-1117 – PBH Gen 1 6R80 Transmission Harness
FORD PERFORMANCE GEN 1 MANUAL CONTROL PACK M-6017-A504VB
FORD PERFORMANCE GEN 2 MANUAL CONTROL PACK M-6017-504V
FORD PERFORMANCE GEN 2 6R80 CONTROL PACK M-6017-M50A
FORD PERFORMANCE GEN 3 MANUAL CONTROL PACK M-6017-M50B
FORD PERFORMANCE GEN 3 10R80 CONTROL PACK M-6017-M50BA
PBH Transmission Components
PBH-700V2 – 6R80 Friction and Steel Installation Instructions
PBH-700V3 – 6R80 Friction and Steel Installation Instructions
TR-2019 – 4R200 Hub for 6R80 installation instructions
TR-2013 – Billet Forward Planet for 6R80 Transmission
Misc Product Instructions
GPS-50-2 – Dakota Digital GPS module instructions for use with BIM module
Lokar Select Shift pinout for Gen 1
ACC-1172 – A/C FAN CONTROL KIT
Lokar Select Shift pinout for Gen 2
PBH Select Shift Switch pinout for Gen 2
Power Steering System Routing Diagrams
6R80 DIMENSIONAL PHOTOS
HP Tuners RTD Ford Performance Control Pack Hardware list
Gen 1 is Copperhead (2048K)
Gen 2 is TC1791
Gen 3 is TC298 (not TC298B)
More From Our Blog
Ryan’s TVS swapped 07 GT500
We recently did some upgrades to Ryan's 2007 GT500. The car came to us with less than 10k on the clock and with only entry level mods like a cold air kit, box tune, and longtube headers. In the quest for more power with great driveability and on pump gas; [...]
Billy Griffin’s Coyote Swapped SN-95 Mustang Racer
Billy brought us his 95 GT in decent track prep. It boasted a 347 stroker engine, TKO500, buit diff, and numerous other mods. We originally added just the PBH specific Wilwood track brakes front and rear. After some track days, the 347 failed and the decision was made to go [...]
PBH in the midway at NMRA Bowling Green
We recently had the opportunity to ride up to 2015 NMRA Nitto Tire All Ford Nationals at Beech Bend Raceway in Bowling Green, KY. We setup our biggest vendor booth ever and enjoyed 4 days and the mediocre weather meeting with fans, customers, and potential PBH clients. We highlighted our [...]
PBH on site for the NMRA opener in Bradenton.
What a weekend! The NMRA opener in Bradenton was yet another great event. We are grateful to have so many great customers that not only support PBH but are as passionate about racing as we are. We have a great group of supporters that make big weekends like this pasts [...]
ARH longtube header installation
There is not denying that a good exhaust system is a must on any Mustang performance build. ARH has been our header of choice for years now and they continue to set the bar high with quality, fitment, and performance. For your 2015 Mustang GT there are several offerings from [...]
SVTP and Lethal Performance visit PBH for 2015 testing
Power By The Hour has great partners in performance. Two of them are Lethal Performance and SVT Performance. Recently Jared Rosen of Team Lethal and Steve Turner of SVTP visited PBH to do some tech testing and installation on the all new 2015 Mustang GT. PBH has be the stop [...]
Big power gains with the all new X.B.A. Inlet for the Shelby GT500
New Shelby GT500 Performance Parts The latest product from Power By The Hour is the X.B.A. Inlet for 2.3L TVS owners. PBH's elbow is a high flow casting replacing the factory unit with no porting necessary. The all new inlet also allows use of Kenne Bells 168mm Monoblade throttle body. The [...]
All new low pricing for the PBH CJ cold air intake kits!
PBH Performance once one of the first to come to market with a cold air intake kit for the Cobra Jet manifolds. That original design is still a top performer. We have made some changes to our manufacturing of the kits and are happy to report that new low pricing [...]
PBH Performance 800+RWHP GT500 Combo
We all know the 2013-14 GT500's have huge power potential, but we never thought we would eclipse the 800RWHP mark with stock valve train, stock supercharger, and stock bottom end. Through rigorous testing, we have put together the combination to make big power with a bolt on parts list and [...]
VIDEO: PBH Power around Sebring International Raceway
You might of caught some recent pictures of PBH customer Jeff Lindstrom's Coyote swapped 1998 Cobra recently on our pages. Jeff is using a bone stock gt power plant along with longtube headers, custom PBH intake pipe, PBH Coyote swap brackets, and Lund Racing tuning. This past weekend he was [...]
Paxton Superchargers in stock and ready to ship!
PBH has your 2200SL Paxton Supercharger in stock and ready to ship! check out our budget beater special starting at $5199. Place your order today and get a free t-shirt and Hat combo with your Paxton. Click here
Cobra Jet intake pipes in production
We will have CJ intake pipes in stock and ready to ship by the end of the week, place your order today to max out your Naturally Aspirated power production. All kit's come with: 4.5" aluminum intake pipe with mass air flange and pcv bung ABS plastic heat shield S&B [...]
PBH built Cobra featured on Stang TV
Jake Long, owner operator of Power By The Hour Performance, has been featured online by Stang TV! Check out the write up on his SN95 Cobra with all new Coyote power. The car is utilizing our Coyote swap brackets, 4R70W automatic, Cobra Jet intake, Lund Racing tuning, and much more..... [...]
Coyote Engine Swap Brackets in stock and ready to ship!
Our exclusive Coyote Engine Swap bracket kit is in stock and ready to ship. The PBH kit comes with all the necessary brackets and hardware to swap a Coyote or Roadrunner V8 into your 96-10 Mustang and keep your accessories. That's right, keep your power steering pump, alternator, and A/C [...]
PBH Flex Fit hats now avaialble
These Flex fit hats proudly display the PBH initials and signature tachometer clock. Available in both Black or Grey in sizes S/M or L/XL. The Black caps have a mesh back while the Grey is a full cover. Order yours today and get Free Shipping and two PBH decals included. [...]