PBH COYOTE SWAP BUILDERS GUIDES
Coyote Swap 1987-1995 Mustang GT
Coyote Swap 1996-2004 Mustang GT
Product Instructions
Product Instructions
Naturally Aspirated Speed Drive for 5.0L Coyote Engine
Speed Drive installation instructions for Naturally Aspirated applications purchased before 2/20/20
Speed Drive installation instructions for Naturally Aspirated applications purchased after 2/20/20
Roush/VMP/Ford Performance 2.3L and 2.6L Rear Feed TVS Supercharger Speed Drives
PBH-1211 – Speed Drive Roush/VMP SC kit for 5.0L Coyote with standard profile PS and Modular Ford AC compressor
PBH-1212- Speed Drive Roush/VMP SC Kit for 5.0L Coyote with standard profile ps and Sanden AC Compressor
PBH-1221- Speed Drive Roush/VMP SC Kit for 5.0L Coyote with Low Profile PS and Mod Ford AC compressor
PBH-1222 – Speed Drive Roush/VMP SC kit for 5.0L Coyote with Low Profile PS and Sanden SD7 compressor
Whipple 2.9L Gen 3 Front Feed Supercharger Speed Drives
PBH-1311 – Speed Drive for Whipple 2.9L Front Feed SC kit for 5.0L Coyote with standard profile PS and Modular Ford AC Compressor
PBH-1322 – Speed Drive Whipple 2.9L front feed SC kit for 5.0L Coyote with Low Profile PS and Sanden SD7 compressor
Edelbrock 2650 Supercharger Speed Drives
Speed Drive Installation Instructions for Edelbrock 2650 Supercharger
Whipple 3.0L Gen 5 Front Feed Supercharger Speed Drives
Speed Drive installation instructions for Whipple Gen 5 Front Feed 5.0L Coyote Supercharger(all variations)
Roush 2650 Front Feed Supercharger
Speed Drive Installation Instructions for the Roush 2650 Supercharger
Individual Component instruction’s
PBH-100 – Alternator bracket instructions for Naturally Aspirated
PBH-101 – Speed Drive alternator bracket instructions for Roush/VMP 2.3L and 2.6L rear feed supercharger
PBH-102 – Speed Drive alternator bracket instructions for GEN3 Whipple 2.9L front feed supercharger
PBH-103 – Speed Drive Alternator instructions for upfit to Roush/VMP rear feed supercharger
PBH-105 – Speed Drive Alternator instructions for Whipple Gen 5 supercharger
PBH-106 – Speed Drive Alternator instructions for VMP Odin Supercharger
PBH-107 – Speed Drive Alternator instructions for Roush 2650 Front Feed Supercharger
PBH-200 – Speed Drive Air Conditioning Compressor instructions for Modular Ford compressor
PBH-201 – Speed Drive Air Conditioning Compressor instructions for Sanden SD7 7176 compressor
PBH-300 – Speed Drive Standard Profile Modular Ford Power Steering Pump bracket instructions
PBH-301 – Speed Drive Low Profile Modular Ford Power Steering Pump bracket instructions
PBH-304 – Speed Drive Revolver GM Type II Power Steering Pump bracket instructions
PBH Speed Series Pulleys
Speed Series pulley instructions for all variations
Control Pack Instructions
PCP-1116B V1 – PBH GEN 1 Original body harness instructions (Purchased prior to 11/1/21)
PCP-1116B V2 – PBH GEN 1 body harness instructions (Purchased after 11/1/21)
PCP-1108 – PBH GEN 2 body harness instructions
PCP-1186 – PBH GEN 3 body harness instructions
PBH-5000 / PBH-5001 / PBH-5002 – PBH Gen 1 6R80 and Manual Control Pack
PBH-5003 / PBH-5003-F150 / PBH-5004 / PBH-5004-F150 – PBH GEN 2 6R80 and Manual Control Pack
PCP-1117 – PBH Gen 1 6R80 Transmission Harness
FORD PERFORMANCE GEN 1 MANUAL CONTROL PACK M-6017-A504VB
FORD PERFORMANCE GEN 2 MANUAL CONTROL PACK M-6017-504V
FORD PERFORMANCE GEN 2 6R80 CONTROL PACK M-6017-M50A
FORD PERFORMANCE GEN 3 MANUAL CONTROL PACK M-6017-M50B
FORD PERFORMANCE GEN 3 10R80 CONTROL PACK M-6017-M50BA
PBH Transmission Components
PBH-700V2 – 6R80 Friction and Steel Installation Instructions
PBH-700V3 – 6R80 Friction and Steel Installation Instructions
TR-2019 – 4R200 Hub for 6R80 installation instructions
TR-2013 – Billet Forward Planet for 6R80 Transmission
Misc Product Instructions
GPS-50-2 – Dakota Digital GPS module instructions for use with BIM module
Lokar Select Shift pinout for Gen 1
ACC-1172 – A/C FAN CONTROL KIT
Lokar Select Shift pinout for Gen 2
PBH Select Shift Switch pinout for Gen 2
Power Steering System Routing Diagrams
6R80 DIMENSIONAL PHOTOS
HP Tuners RTD Ford Performance Control Pack Hardware list
Gen 1 is Copperhead (2048K)
Gen 2 is TC1791
Gen 3 is TC298 (not TC298B)
More From Our Blog
Power By The Hour Performance Shirts have arrived!
Now you can own the same shirt the crew at PBH rocks in the shop and at the track. Order yours today before your next event. Sizes available are L and XL in any color you like, as long as it's black.
Eddie’s Coyote Swapped SN-95 Mustang GT
Eddie brought us is 98 GT for a new lease on life. The 2v had just had it and power upgrades were limited. A new 5.0L Coyote engine was just the ticket to get the car where Eddie would want it. PBH sourced him an Aluminator engine, Maximum Motorsports Kmember, [...]
THUMP RACING GT500 TENSIONERS IN STOCK
Power By The Hour Performance now stocks Thump Racing belt tensioners for your GT500. Thump Racing's design is thicker than factory tensioners and offer even more tension on the belt. These features help keep the belt in place and from slipping. This product is used and recommended by Ford [...]
VORTECH ANNOUNCEMENT
Power By The Hour Performance has expanded it's product line by adding Vortech and Paxton supercharger systems. You can now order your system direct from PBH Performance. You can also opt to have your system installed in house and tuned in house by Ken Bjonnes from Lund Racing. These packages [...]
Ford Racing Aluminator assembly video
Ford Racing has released a detailed video on the assembly process of their Aluminator Coyote engines. The video describes the parts and process that are in use during the build. PBH Performance has used the Aluminator series of engines from FRPP on multiple builds and we have found much success [...]
PBH EXCLUSIVE: HD T-BOLT CLAMP UPGRADE FOR VORTECH/PAXTON SUPERCHARGER SYSTEMS
There is no denying that the addition of a Vortech or Paxton supercharger on to your Coyote powered Mustang is a big power producer. The issue that comes along with making more power typically lies in the worm clamps supplied in the kit. PBH has put together an upgrade to [...]
All new Coyote Engine Swap Brackets from PBH
Looking to drop a Coyote powerplant in your project car? Power By The Hour has the brackets for you! PBH has developed a new set of engine swap brackets that allow you to use engine accessories from a 1996-2010 Mustang on any Coyote engine. They can be used for any [...]
Paxton Supercharger kits for 2011+up GT/Boss now available through PBH Performance
Power By The Hour Performance now offers custom Paxton Supercharger Kits for the 2011 and up Mustang GT/Boss. Starting at $5199; Our base systems start with the 2200SL supercharger from Paxton. The 2200SL is a "self oiled" unit, that means no tapping of the oil pan. It also has a [...]
PBH and Lund Racing take home King of the Street!
Annually 5.0 Mustang and Super Fords host's a King of the Street competition. PBH Performance is no stranger to the KOT's competition and format. We had previously taken three turbocharged rides to Kentucky. This time around we knew we had the field covered with the likes of the Twin Turbo [...]
Coffeeman breaks into the 8’s
By now you have seen and heard a lot about Coffeeman's Coyote. The evolution of the car has been well documented along side the Twin Turbo 5.0. The goal for both cars is the same. Be the fastest Mustangs on the planet while keeping gear as stock as possible. Items [...]
Worlds Quickest 2013 Ford Shelby GT500 – Video
A new record low ET has been set for all 2013 GT500 Mustangs. Lethal Performance, Ken Bjonnes of Lund Racing, and Power By The Hour Performance have put together the what is now the Worlds Quickest 2013 GT500 utilizing the best in the aftermarket arena. The Lethal Snake is using [...]
World’s Quickest Twin Turbo Coyote Street Car Goes 9.26@155
http://www.youtube.com/watch?v=xS-DQ8Imo3g The bar just got set higher for Turbo Powered 2011+ Coyote Mustang street cars. Holding the record for over a year, TWINTURBO50.COM recently headed back out to the drag strip with their Twin Turbo Coyote to improve on their previous best of 9.37@154 which was run at the 2012 [...]
Coffeeman 9.01@151 in-car video
We are almost there. Our quest to get Coffeeman's Procharged Coyote into the 8's is one step closer to being accomplished. We took a trip to Palm Beach International Raceway to test and hopefully break into the 8 second brackets. Although not disappointed with a new personal best of 9.01@151mph, [...]
Take a ride with “Ego Breaker”
Over the years we have had the privilege to work on several top notch projects and builds. Sergio Rojas is one of the top builds that we have been part of. His 88' Saleen is one of the best examples of a clean street car that can really put it down. We [...]
Free Boss 302 Wallpaper
Enjoy this free Wallpaper from Lund Racing and Power By The Hour Performance. It is of a 2012 Boss 302 that we recently did a T6060 upgrade with Mcleod RXT clutch and SFI bellhousing. All this in preparation for the upcoming Twin Turbo System that will soon be available through [...]