PBH COYOTE SWAP BUILDERS GUIDES
Coyote Swap 1987-1995 Mustang GT
Coyote Swap 1996-2004 Mustang GT
Product Instructions
Product Instructions
Naturally Aspirated Speed Drive for 5.0L Coyote Engine
Speed Drive installation instructions for Naturally Aspirated applications purchased before 2/20/20
Speed Drive installation instructions for Naturally Aspirated applications purchased after 2/20/20
Roush/VMP/Ford Performance 2.3L and 2.6L Rear Feed TVS Supercharger Speed Drives
PBH-1211 – Speed Drive Roush/VMP SC kit for 5.0L Coyote with standard profile PS and Modular Ford AC compressor
PBH-1212- Speed Drive Roush/VMP SC Kit for 5.0L Coyote with standard profile ps and Sanden AC Compressor
PBH-1221- Speed Drive Roush/VMP SC Kit for 5.0L Coyote with Low Profile PS and Mod Ford AC compressor
PBH-1222 – Speed Drive Roush/VMP SC kit for 5.0L Coyote with Low Profile PS and Sanden SD7 compressor
Whipple 2.9L Gen 3 Front Feed Supercharger Speed Drives
PBH-1311 – Speed Drive for Whipple 2.9L Front Feed SC kit for 5.0L Coyote with standard profile PS and Modular Ford AC Compressor
PBH-1322 – Speed Drive Whipple 2.9L front feed SC kit for 5.0L Coyote with Low Profile PS and Sanden SD7 compressor
Edelbrock 2650 Supercharger Speed Drives
Speed Drive Installation Instructions for Edelbrock 2650 Supercharger
Whipple 3.0L Gen 5 Front Feed Supercharger Speed Drives
Speed Drive installation instructions for Whipple Gen 5 Front Feed 5.0L Coyote Supercharger(all variations)
Roush 2650 Front Feed Supercharger
Speed Drive Installation Instructions for the Roush 2650 Supercharger
Individual Component instruction’s
PBH-100 – Alternator bracket instructions for Naturally Aspirated
PBH-101 – Speed Drive alternator bracket instructions for Roush/VMP 2.3L and 2.6L rear feed supercharger
PBH-102 – Speed Drive alternator bracket instructions for GEN3 Whipple 2.9L front feed supercharger
PBH-103 – Speed Drive Alternator instructions for upfit to Roush/VMP rear feed supercharger
PBH-105 – Speed Drive Alternator instructions for Whipple Gen 5 supercharger
PBH-106 – Speed Drive Alternator instructions for VMP Odin Supercharger
PBH-107 – Speed Drive Alternator instructions for Roush 2650 Front Feed Supercharger
PBH-200 – Speed Drive Air Conditioning Compressor instructions for Modular Ford compressor
PBH-201 – Speed Drive Air Conditioning Compressor instructions for Sanden SD7 7176 compressor
PBH-300 – Speed Drive Standard Profile Modular Ford Power Steering Pump bracket instructions
PBH-301 – Speed Drive Low Profile Modular Ford Power Steering Pump bracket instructions
PBH-304 – Speed Drive Revolver GM Type II Power Steering Pump bracket instructions
PBH Speed Series Pulleys
Speed Series pulley instructions for all variations
Control Pack Instructions
PCP-1116B V1 – PBH GEN 1 Original body harness instructions (Purchased prior to 11/1/21)
PCP-1116B V2 – PBH GEN 1 body harness instructions (Purchased after 11/1/21)
PCP-1108 – PBH GEN 2 body harness instructions
PCP-1186 – PBH GEN 3 body harness instructions
PBH-5000 / PBH-5001 / PBH-5002 – PBH Gen 1 6R80 and Manual Control Pack
PBH-5003 / PBH-5003-F150 / PBH-5004 / PBH-5004-F150 – PBH GEN 2 6R80 and Manual Control Pack
PCP-1117 – PBH Gen 1 6R80 Transmission Harness
FORD PERFORMANCE GEN 1 MANUAL CONTROL PACK M-6017-A504VB
FORD PERFORMANCE GEN 2 MANUAL CONTROL PACK M-6017-504V
FORD PERFORMANCE GEN 2 6R80 CONTROL PACK M-6017-M50A
FORD PERFORMANCE GEN 3 MANUAL CONTROL PACK M-6017-M50B
FORD PERFORMANCE GEN 3 10R80 CONTROL PACK M-6017-M50BA
PBH Transmission Components
PBH-700V2 – 6R80 Friction and Steel Installation Instructions
PBH-700V3 – 6R80 Friction and Steel Installation Instructions
TR-2019 – 4R200 Hub for 6R80 installation instructions
TR-2013 – Billet Forward Planet for 6R80 Transmission
Misc Product Instructions
GPS-50-2 – Dakota Digital GPS module instructions for use with BIM module
Lokar Select Shift pinout for Gen 1
ACC-1172 – A/C FAN CONTROL KIT
Lokar Select Shift pinout for Gen 2
PBH Select Shift Switch pinout for Gen 2
Power Steering System Routing Diagrams
6R80 DIMENSIONAL PHOTOS
HP Tuners RTD Ford Performance Control Pack Hardware list
Gen 1 is Copperhead (2048K)
Gen 2 is TC1791
Gen 3 is TC298 (not TC298B)
More From Our Blog
Lund Racing takes flight at World Cup!
After a hard fought weekend at the MIR, the Lund Racing team can walk away knowing a few things; They have a dedicated group of guys. Jon Sr is a wild man! They have reset the 6R80 ET record with an IRS car. Hard landings suck. What the sky [...]
Fred’s Coyote Swapped 83 Fairmont
We spotted Fred Felt's Fairmont at Foxtoberfest 2019 recently. The Fairmont stood out a bit in the croud due to its Coyote transplant. On board is our first generation Speed Drive that used the older 96-04 alternator(soon to be upgraded). Fred tells us the car was built with a Gen [...]
Lund Racing reset’s the 6R80 record with a PBH Built Transmission
The guys at Lund Racing keep pushing their S550 Blue Goose to the limits. Now they have reset the 6R80 record down to [email protected]. Additionally they also dipped into the 4's in the 1/8th mile laying down a 4.925. All this with a factory style IRS in the back. On [...]
Vinny’s Coyote Swapped 89 GT
We spotted Vinny at Foxtoberfest 2019 in Kannapolis, NC. As soon as we knew the car was coyote swapped and was #pbhequipped we had to get him to tell us about the build. In this video he lays out what they did and how in his own words. Thank you [...]
Coyote Swapped 88 Thunderbird
We bumped into Adam Delamielleure at Foxtoberfest 2019 in Kannapolis, NC. He had one of the nicest 88 Thunderbirds we have seen. On top of that, it was Coyote Swapped! As we looked over the bird we spotted our Speed Drive on the front of the engine and we knew [...]
Matthew Plavidal’s Calypso Coyote Swap
Matthew Plavidal may have the cleanest Coyote swapped Fox Body Mustang we have seen. The car is a 1992 LX Coupe that has been under the knife for some time. Matt explains in the video how the swap came to be. He also tells us what parts he used to [...]
Coyote Swap basics video is live!
PBH Coyote Swap Specialist Frank Perdomo goes over the basic information you should know before you plan your Coyote Swap. He covers Engine choices with differences between F150 and Mustang coyote Engines. Transmission options for all powertrain swaps, Exhaust options, Cooling system mods, tuning, and more. If you are planning [...]
We Will See You At Foxtoberfest!
We are heading to Kannapolis, NC to join all the Fox Chassis rides at Foxtoberfest October 17-19, 2019. We will be there Friday afternoon for the kick off party and you will also find us in the midway all day Saturday. On display will be all of our Coyote Swap [...]
American Muscle Builds A Coyote Swapped Fox for Make A Wish
We recently were contacted by Justin from American Muscle for a build they were doing for one very special young man. Matt had recently received a heart transplant and was asked what his wish was. After turning down the offer he revealed that his grandmother had gave him a Mustang [...]
We visit with Jeremy Dover from Dover’s Garage
We recently got to visit our friends at Dovers Garage in Trenton, TN. Jeremy Dover's name might sound familiar to you if you follow Caleb Richard's Foxcast Media channel. The two work together to modify, restore, and race a wide range of Fox chassis cars. One of the more popular [...]
New 6R80 Record set by a PBH Built 6R!
Power By The Hour Performance has worked with Lund Racing to build some very unique and powerful bad ass rides in the past. We have worked together to develop the 4R200 hub for the 6R80 transmission and it has been a success both on and off the track. The Blue [...]
New Product from Power By The Hour Performance
We have released our all new Feed Port Relocation Kit for 4.6L Modular Ford Power Steering pumps. These pumps are used in all of our Speed Drive systems for the 5.0L Coyote engine. The Speed Drive's have been well known in the Mustang Coyote Swap world and have now found [...]
All new Speed Drive by PBH
Power By The Hour Performance has been manufacturing Coyote Swap solutions since 2012. Our first product was our Accessory Drive Bracket kit for the 5.0L Coyote where we added a Ford Power Steering pump to the engine. We have carried that design since and have made several updates to it [...]
New part from PBH for your 2011-17 Coyote engine.
We are announcing an all new part to our Coyote Engine lineup. The Vacuum Port for 2011-17 GT intake manifolds is a quick easy replacement piece to eliminate the pcv tube on the passenger side of the engine. When upgrading to a breathable catch can, you are left with a [...]
An All New Coyote Swap Header Option from PBH!
PBH now has a new solution for your Coyote Swap. For anyone doing a swap in a Fox Mustang the UPR Kmember is a solid choice to get the job done. When using aftermarket Kmembers the exhaust manifolds are a particular issue. As seen on our site we offer specific [...]